OWSPA311g
Description | Version |
1.2 | |
1.3.0 | |
For software downloads and Electrical & Mechanical Datasheets, please login to our support area. | |
Key features
The SERIAL WIRELESS LAN MODULE from connectBlue has been developed for integration in industrial devices providing state of the art low power features. The module minimizes the work needed to implement Wireless LAN (IEEE 802.11b/g) in a device as it provides all software, hardware, type approval, EMC certification etc. It is developed for reliable, high demanding industrial devices and applications and requires no host driver.
The Serial Wireless LAN Module is a complete Wireless LAN implementation. No external driver is needed. The Wireless LAN module has a small form factor and the interface layout is the same as the Bluetooth modules from connectBlue, which enables customers to prepare their device for both Bluetooth and/or Wireless LAN.
- Supports both 802.11b and 802.11g
- No software driver needed
- Radio type approved for Europe
- Radio type approved for US and Canada
- Compliant with EMC standards
- Industrial temperature range -30 to +85 C
- Exceptional low power modes
- Compatible with connectBlue Bluetooth modules
- Supports security features WEP64, WEP128, WPA-PSK, WPA2-PSK (TKIP/AES), LEAP
- Ad-hoc and infrastructure mode
- Internal or dual external antennas (diversity supported)
- UART speed up to 2.7 Mbps
- Custom baud rate support
Technical data
PHY/MAC
802.11b and 802.11g
Extended rate protection
Regulatory domain support
Advanced power management
Defragmentation
Antenna diversity
Operational modes
BSS (infrastructure)
IBSS (ad-hoc)
Security
WEP64
WEP128
WPA-PSK
WPA2-PSK
TKIP
CCMP (AES)
LEAP
Software
All software is included in the module
Configurable locally or over Wireless LAN using AT commands or PC Wizard (Wizard included)
Protocols
TCP
UDP
Additional features
TX power calibration
Link adaptation
Advanced power management
DHCP-client
DNS-resolver
Roaming
Connect on data trigger
Serial Interface
UART Logic-Level
Supported baud-rates: 300 - 2.7 Mbps
Support for non-standard baud rates
Flow control: CTS/RTS or none
Full modem signalling
Connectors
Board-to-board connector
Solder pads
JST 6-pin connector (optional)
Antennas
Internal or single and dual external (diversity)
Power
3.3-5.5 VDC
Transmitting at full speed: 130 mA@5VDC
Sleep mode (connected): 7.4 mA@5VDC
Stop mode (disconnected): 0.76 mA@5VDC
Dimensions
23 x 36 x 3.1 mm
Weight
3.8 g
Type Approval
R&TTE (Europe)
FCC/CFR 47 part 15 unlicensed modular transmitter approval
IC (Industrie Canada)
Environmental
Maximum operating temperature: -30 - +85 °C
Storage temperature: -40 - +85°C
Humidity RH 5-90% non-condensing
Shock and vibration: IEC 61131-2
Certifications and Compliance
R&TTE Directive 1999/5/EC
EN 300 328 V1.6.1 (2004-11)
EMC Directive: 89/336/EEC
EN 301 489-1 V1.4.1 (2002-08)
EN 301 489-17 V1.2.1 (2002-08)
EN 61000-6-2 (2001)
Safety Compliance
EN 60950-1:2001 and/or IEC 60950-1:2001 (1st Edition)
EN 60950-1/A11:2004 + Corrigendum:2004
Order numbers
cB−OWSPA311gi−00: OEM USB Wireless LAN Starter kit
Includes:
- OEM USB Module adapter
- Wireless LAN module OWSPA311gi-04
- USB extension cable
- CD
cB−OWSPA311gi−01: OEM RS232 Wireless LAN Starter Kit
Includes:
- OEM RS232 Module adapter 3
- Wireless LAN module OWSPA311gi-04
- 9-pin Dsub serial cable
- USB power cable
- CD
cB−OWSPA311gi−04: OEM Wireless LAN module Internal Antenna, solder edge and "board to board" connectors
cB−OWSPA311gi−06: OEM Wireless LAN module with Internal Antenna, solder edge, "board to board" and JST 6-pol connectors
cB−OWSPA311gx−04: OEM Wireless LAN module with External Antenna, solder edge and "board to board" connectors
cB−OWSPA311gx−06: OEM Wireless LAN module with External Antenna, solder edge, "board to board" and JST 6-pol connectors