OEMSPA310

Downloads

Description	Version
Product Brief	1.2
AT Commands Specification	3.15
Multipoint AT Commands Specification	3.2
Repeater Functional Description	3.0
I/O AT Commands Specification & Functional Description	3.7
OBEX (FTP / OPP) User manual	1.01
Optimizing the Performance	rev 7
Migrating from Bluetooth 1.1 to 2.0 products	1.1
For software downloads and Electrical & Mechanical Datasheets, please login to our support area.

Key features

The OEM SERIAL PORT ADAPTER™ 310 series is a Bluetooth class 2 module with a small form factor and a low profile. It is optimized for cost efficiency, but without compromising functionality, quality or compatibility with other connectBlue Bluetooth and Wireless LAN modules.

Cost efficient
Small in size
Low profile
Designed for high performance/throughput
Configurable for short latency/delay
AT Command support
Wireless LAN co-existence support
Configuration over Bluetooth
Bluetooth Qualified as Product (Bluetooth version 2.0)
Radio Type Approved for Europe, US and Canada
Compliant with EMC, Safety and Medical standards
Lead Free and RoHS compliant
Only high quality components used
Internal antenna
Different mounting options
Module can be soldered directly on to host PCB
Industrial and Automotive temperature range -30 - +85°C
Individually tested and tuned in production
Custom configuration possible
Firmware as standard:
- Serial Port Profile (SPP)
- Dial-up Networking (DUN) Profile
Firmware for special functionality available:
- Multipoint with Wireless Multidrop™
- Repeater functionality
- Wireless I/O functionality
- File Transfer Profile (FTP)
- Object Push Profile (OPP)

Technical data

Bluetooth Support

Bluetooth version 2.0 (Qualified and Listed as Product)

Supported Bluetooth Profiles:

Generic Access Profile (GAP)
Serial Port Profile (SPP)
Dial-up networking Profile (DUN GW, DUN DT)
File Transfer Profile (FTP) (option)
Object Push Profile (OPP) (option)

Class 2 +3.5 dBm (up to 50 m)

Bluetooth Chipset and Stack

Product based on Philips well known BGB203 chipset and Philips Embedded Stack

Software

All software is included in the module.
Configurable locally or over Bluetooth using AT Commands or PC Wizard

Serial Interface

UART Logic-Level
Supported baud rates: 300 – 921.6k
Support for non-standard baud rates
Flow control: CTS/RTS or none
RS232/422/485 support (external transceiver needed)

Power Supply

3.0 - 6.0 VDC

Current Consumption

Min:7.9 mA
Average: 17 mA
Max: 70 mA (Peak)

Dimension/Size

16 x 36 x 2.4 mm

Type Approval

R&TTE (Europe)
FCC/CFR 47 part 15 unlicensed modular transmitter approval
IC (Industrie Canada)

Environmental

Maximum operating temperature: -30 - +85 °C
Storage temperature: -40 - +85°C
Humidity RH 5-90% non-condensing
Shock and vibration: IEC 61131-2

Certifications and Compliance

R&TTE Directive 1999/5/EC
EN 300 328 V1.6.1 (2004-11)

EMC Directive: 89/336/EEC
EN 301 489-1 V1.4.1 (2002-08)
EN 301 489-17 V1.2.1 (2002-08)
EN 61000-6-2 (2001)

Safety Compliance
EN 60950-1:2001 and/or IEC 60950-1:2001 (1st Edition)
EN 60950-1/A11:2004 + Corrigendum:2004

Medical Electrical Equipment
IEC 60601-1-2 (2001)

Order numbers

cB−OEMSPA310i−04:
OEM Serial Port Adapter 310i Internal Antenna, solder edge and "board to board" connectors